Goto Function; Navigation To Waypoint; Deleting Destination - VDO MAP 7w Plus GPS User Manual

Production Installation
♦
Pingos
♦
No Data Available
♦
If any of these alarm conditions is detected, the function returns the list of dan-
gerous objects and the relative dangerous Route leg, that is drawn with a differ-
ent color.
To activate this function:
[MENU] + [MENU] + "ROUTE" + [ENTER] + "AUTOMATIC CHECK" + [ENTER]
+ "ON" + 'ENTER'
NOTE If Automatic Route Check is enabled, anytime you append or insert a new
Waypoint, delete, move or edit any Waypoint, the Route is checked. Only the
modified Route legs are checked.
To select the width of the detected area aside the Route:
[MENU] + [MENU] + "ROUTE" + [ENTER] + "ROUTE WIDTH" + [ENTER]
NOTE Safe Route width value represents half the total width checked by the
function.
To select the depth of the detected area aside the Route:
[MENU] + [MENU] + "ROUTE" + [ENTER] + "DEPTH LIMIT" + [ENTER]
It also possible to select the accuracy for the Route check, among Minimum, Low,
Medium, High and Maximum:
[MENU] + [MENU] + "ROUTE" + [ENTER] + "ACCURACY" + [ENTER]
The list of the dangerous objects found on the charts crossed by the Route is
shown in the Route check report, follow the procedure:
[MENU] + [MENU] + "ROUTE" + [ENTER] + "ROUTE CHECK REPORT" +
[ENTER]
3.3

GOTO FUNCTION

This functions allows you to place the destination point and immediately start
navigating to it.

Navigation to Waypoint

Place the cursor on the desired Waypoint + [ENTER] + "GOTO" + [ENTER]
A circle surrounds the Waypoint symbol. A dotted line is shown, connecting the
destination with the ship's position. When the destination is placed, all navigation
data are referred to it.

Deleting destination

If the destination has been placed, to stop the navigation to the Waypoint:
Place the cursor on destination icon + [ENTER] + "STOP NAV" + [ENTER]
NOTE If you select "NEXT"/"PREVIOUS" the destination icon is moved on the next/
previous Waypoint in the Route.
Otherwise when the cursor is placed on a generic position on the chart:
[ENTER] + "GOTO" + [ENTER] + "STOP NAV" + [ENTER]
NOTE If you select "START", the destination icon is moved on the new cursor position.
The symbol that identifies the destination disappears from the screen, but the
Waypoint remains.
30
User Manual