Video Input option
♦
Video Output option
♦
Shows the most important engine data. It is connected to the engine
♦
electronic system of up to two machines through two CAN bus inputs
and receives engine data. The display unit also has two bus outputs to
transfer data to VDO Easy Link Indicators. A maximum of 20 Easy Link
indicators can be connected per output.
TECHNICAL SPECIFICATIONS
Power consumption
♦
Power consumption
♦
Interface
♦
Autopilot Interface
♦
Engine Interface
♦
Gauge Interface
♦
Display
♦
Display Resolution
♦
Video Input
♦
Video Output
♦
Cartography
♦
Operating temperature range : 0/+55°C (32/+131°F)
♦
Memory
♦
Keyboard
♦
Weight
♦
When the package containing the chart plotter is first opened, please check it for
the following contents (if any parts are missing contact the dealer the chart plot-
ter was purchased from):
External bracket and I/O cable 1,5 mt/5,9 feet
♦
Video Input cable (2 pcs)
♦
Video Output cable
♦
Engine cable 1,5 mt/5,9 feet
♦
Chart plotter's protective cover
♦
Fuse 2 Amp. + fuseholder
♦
Flush mounting kit
♦
Smart DGPS WAAS Receiver with cable 15 mt/45 feet
♦
User Manual
♦
INSERTING/REMOVING PROCEDURE
Inserting the C-CARD
Hold the C-CARD by the short inclined side so that you can see the C-MAP B
J
label. Open the door (see left side of the following picture), gently push
EPPESEN
the C-CARD into one of the two slots; push the C-CARD in as far as it will go, then
close the door to hold fixed into the slot.
102
: 1.3A max @ 12V
: 1.5A max @ 12V
: NMEA-0183
: NMEA-0180, NMEA-0180/CDX, NMEA-0183
: CAN 2.0B Input for 2 Engines support-
ing SAE J1939
: 2 x Easy Link Output for analogue En-
gine Slave Instruments
: TFT transmissive LCD
: 800 x 600 pixels
: PAL or NTSC video signals automatically
selected
: VGA compatible (optional adapter cable)
: C-MAP B
J
Y
EPPESEN
: Non volatile
: Silicon rubber, backlight
: 1,6 Kg
(with camera connected)
(active area 10.4")
C-CARD
User Manual
Y