Installing / Removing The Belt Hook; Installing / Removing Optional Accessories - Kenwood ProTalk XLS TK-3130 Instruction Manual

I / R
NSTALLING
If desired, attach the belt hook
to the rear of the transceiver
using the 2 supplied screws.
I / R
NSTALLING
Note: Always switch OFF the transceiver power when installing or
removing the optional accessories.
The following accessories can be used with this transceiver:
• KMC-21 Speaker-Microphone
• KHS-21 Headset
• KHS-1 Headset
• EMC-3 Clip Microphone with Earphone
To install these accessories:
1 Open the SP/MIC tabs on the side of
the transceiver.
2 Insert the accessory's plugs into the
SP/MIC jacks.
3 When you remove the accessory
from the transceiver, be sure to cover
the SP/MIC jacks with the attached
tabs in order to keep dust and dirt
away from the contacts.
Note: Refer to the accessory instruction manuals for detailed
instructions on each of the accessories.
8
EMOVING THE
O
EMOVING PTIONAL
B H
ELT OOK
A
CCESSORIES