Opening The Display - Toshiba Satellite E300 series User Manual

1. Connect the power cord to the AC adaptor.
Either a 2-pin or 3-pin adaptor/cord will be included with the computer
depending on the model.
2. Connect the AC adaptor's DC output plug to the DC IN 19V jack on the
left hand side of the computer.
1. DC IN 19V jack
3. Plug the power cord into a live wall outlet - the DC IN/Battery indicator
on the front of the computer should glow.

Opening the display

The display panel can be opened to a wide range of angles for optimal
viewing.
User's Manual
Figure 1-1 Connecting the power cord to the AC adaptor (2-pin plug)
Figure 1-2 Connecting the power cord to the AC adaptor (3-pin plug)
Figure 1-3 Connecting the DC output plug to the computer
2. DC output plug
Getting Started
1
2
1-5