Real Time Clock - Toshiba Satellite E300 series User Manual

Real Time Clock

Problem
The following message
is Displayed on the
screen:
RTC Power
Failure.
Check system.
Then press [F2]
key.
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to the section
Operating Basics, for further information.
Problem
Output to screen is
garbled
User's Manual
Procedure
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and
time in the BIOS setup application by using the
following steps:
1. Turn on the computer.
2. Press the F2 (
Leading Innovation >>> screen
appears - the BIOS setup application will
load.
3. Set the date in the System Date field.
4. Set the time in the System Time field.
5. Press F10 (
F10
will be displayed.
6. Press the Y key - the BIOS setup application
will end and the computer will restart.
The Keyboard
Procedure
Please refer to your software's documentation to
ensure that it is not remapping the keyboard in
any way (remapping involves changing or
reassigning the function of each key).
If you are still unable to use the keyboard, you
should contact TOSHIBA Support.
Troubleshooting
) key when the TOSHIBA
F2
) - a confirmation message
in Chapter 3,
6-7