Power Control - VINCENT SV-237 Instructions For Use Manual

CONNECTION OF TWO ADDITIONAL
You only need the "PRE OUT" sockets (12) if you want to use a separate stereo amplifier or two mono
amplifiers to supply two additional loudspeakers. This makes sense if you intend to use two more loud-
speakers for stereo music playback, for example in a separate zone (another room of your home). These
loudspeakers are then connected to the speaker outputs of the additional amplifier(s). The amplifier out-
put connections "PRE OUT" (12) must be connected with the input connectors of the main amplifier, in
most cases labelled "INPUT", "POWER AMP IN" or "MAIN INPUT".
SV-237
Instead of the stereo main amplifier shown here you can alternatively use two mono main amplifiers.
CONNECTION OF A USB-SOURCE DEVICE
The integrated D/A converter makes it possible to transfer digital music signals directly from the compu-
ter through the amplifier similar to the boxes. For this, the USB jack serves as input.
SV-237
CONNECTIONS FOR THE STANDBY CONTROL
Many AV-Systems consist of a multitude of individual components. To avoid the necessity of switching them
on and off before and after every use, many manufacturers have equipped their devices with what is
known as "POWER CONTROL" circuit or "TRIGGER". This kind of remote-controlled standby circuit is
used primarily for preamplifier and power amplifiers. Particularly for preamplifiers and main amplifiers
this kind of remote standby control is utilized, as power amplifiers are often placed far from other devi-
MAIN AMPLIFIER CHANNELS
RCA connection

(POWER CONTROL)

INPUT
USB Connection
Stereo main amplifier
PC
Laptop
Vincent
33