Information Function; Observing The Maintenance Inspection Information - JUKI LK-1900B/IP-420 Instruction Manual

27. INFORMATION FUNCTION

There are three functions below in the information function.
1) Oil replacement time, needle replacement time, cleaning time, etc. are designated and the warning notice
is performed when the designated time has passed.
→ Refer to
"27-1 Observing the maintenance inspection information" p.94
"27-2 Inputting the inspection time" p.96
2) Speed can be checked at a glance and the target achieving consciousness as a line or group is increased
as well by the function to display the target output and the actual output.
→ Refer to
"27-4 Observing the production control information" p.98
"27-5 Performing setting of the production control information" p.101
3) Information on machine working ratio, pitch time, machine time and machine speed can be displayed from
the working state of the sewing machine.
→ Refer to
"27-6 Observing the working measurement information" p.105
In addition, information on plural sewing machines can be controlled by the server when this function
is used by connecting SU-1 (sewing machine data server utility) with the sewing machines.

27-1 Observing the maintenance inspection information

① Display the information screen.
When information key
section is pressed in the data input screen, the
information screen is displayed.
② Display the maintenance information screen.
Press maintenance inspection information screen
B in the information screen.
display button
.
A of the switch seat
– 94 –
and
and
.
.
A
B