To Continue Performing Sewing From Some Point In Sewing - JUKI LK-1900B/IP-420 Instruction Manual

10-1 To continue performing sewing from some point in sewing

① Release the error.
Press RESET button
② Perform thread trimming.
Press THREAD TRIM button
When thread trimming has been performed,
FEED BACK button
E and RETERN TO ORIGIN button
button
F are displayed on the screen.
③ Adjust the presser to the re-sewing position.
When FEED BACK button
the presser returns stitch and by stitch and when
FEED FORWARD button
advances stitch by stitch. Move the presser to the
re-sewing position.
④ Re-start the sewing
When the pedal is depressed, sewing starts
again.
B to release the error.
C to perform
D ,FEED FORWARD
D is pressed,
E is pressed, it
– 27 –
D
B
C
E
F