Kenwood KDC-X399 Instruction Manual page 31

INSTALLATION / CONNECTION
Wiring connection
(for
Rear, front, subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
)
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 11)
If no connections are made, do not let the wire come out from the tab.
White
White/Black
Light blue/yellow
Gray
(Marine remote control
wire)
Gray/Black
Green
Green/Black
Purple
Brown
Purple/Black
(Mute control wire)
Red (Ignition wire)
Blue/White
(Power control wire)
Yellow (Battery wire)
Blue
(Antenna control wire)
MIC (Microphone input terminal) ( 13)
To Kenwood Wired Marine Remote
Control unit (optional accessory)
For the latest information on marine
accessories please go to:
http://www.kenwoodusa.com/
Car_Entertainment/Marine/
To connect the Kenwood navigation
system, refer your navigations manual
To the power control terminal when
using the optional power amplifier
(Not used)
When connecting to an external
amplifier, connect its ground
wire to the car's chassis to avoid
damaging the unit.
Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
29
ENGLISH