Mazda 2015 5 Owner's Manual page 261

Changing the link to a Bluetooth
audio device
If several devices have been programmed,
®
the Bluetooth unit links the device last
programmed. If you would like to link a
different programmed device, it is
necessary to change the link. The order of
device priority after the link has been
changed is maintained even when the
ignition is switched off.
1. Using the audio control dial, select the
link change mode LINK CHANGE
in the BT SETUP mode. (Refer to
®
Bluetooth audio device set-up for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the currently linked
®
Bluetooth audio device is displayed.
®
If no Bluetooth audio device is
currently linked, the name of the first
device among the programmed devices
is displayed.
®
4. Turn the audio control dial to select the
name of the device you would like to
link.
5. Press the audio control dial to select the
device you would like to link.
The
PAIRING flashes in the display.
NOTE
When "GO BACK" is selected and the audio
control dial is pressed, the display returns to
"LINK CHANGE".
6. If the link to the desired device is
successful, the
displayed again, together with
LINK CHANGED .
LINK CHANGED is displayed for
three seconds, then it returns to the
normal display.
Interior Comfort
Bluetooth® Audio
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
symbol disappears, and
symbol is
6-65