Names And Functions Of Parts; Main Unit - Kenwood VR-716 Instruction Manual

Names and functions of parts

Main Unit

Speaker indicator
CLIP indicator
TONE indicator
LOUDNESS indicator
96kHzfs indicator
POWER
STANDBY
ON STANDBY
SPEAKERS ON OFF
PHONES
1 POWER ON/STANDBY
Use to turn the power ON/STANDBY.
STANDBY indicator
2 DIMMER key
Use to select the REC MODE.
Use to adjust the brightness of the display.
3 LISTEN MODE key
Use to select the listening mode.
4 Surround LED (light-emitting diode)
indicators
ACTIVE EQ mode LED indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DTS mode LED indicator
Lights when the receiver is in the DTS mode.
DOLBY DIGITAL mode LED indicator
Lights when the receiver is in the Dolby
Digital mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back-up the memory. This is called standby mode. Under the
condition, the system can be turned ON by the remote control unit.
6 EN
MUTE indicator
Speaker selection indicators
Input channel indicators
Output channel indicators
DIMMER LISTEN MODE ACTIVE EQ DTS DOLBY DIGITAL
ACTIVE EQ INPUT MODE BAND AUTO
5 SOUND key
^
key
Use to adjust the sound quality and the
ambience effects.
6 MULTI CONTROL knob
)
Use to control a variety of settings.
7 INPUT SELECTOR knob
¶ Use to select the input sources.
8 VOLUME CONTROL knob
∞
9 PHONES jack
Use for headphone listening.
0 SPEAKERS ON/OFF key
( Use to turn the speakers ON/OFF.
! ACTIVE EQ key
Use to select ACTIVE EQ setting.
@ INPUT MODE key
∞
Use to switch between full auto, digital and
analog inputs.
∞
Frequency display,
Input display,
Preset channel display,
DTS indicator
Surround mode display
Band indicators
DOLBY DIGITAL
indicator
PRO LOGIC
indicator
Display
MULTI CONTROL
SOUND
MEMORY
SETUP
AUTO DETECT
indicator
6CH INPUT indicator
DIGITAL indicator
DSP indicator
STEREO indicator
VOLUME CONTROL
DOWN
INPUT SELECTOR
MUTE
# BAND key
§
Use to select the broadcast band.
$ AUTO key
^
Use to change "TAPE" indication to "MD".
*
Use to select the auto tuning mode.
% MEMORY key
*
Use to store radio stations in the preset
(
memory.
^ SETUP key
*
Use to select the speakers' settings etc.
& MUTE key
(
Use to temporarily mute the sound.
8
AUTO indicator
MEMO. indicator
ST. indicator
TUNED indicator
UP
¡
*
¡
¡
^
(