Miele G 4920 Operating Instructions Manual page 14

Warning and Safety instructions
Correct installation

The dishwasher must be installed and connected in compliance
with the installation diagram supplied.

Take care, both before and during installation of the dish‐
washer, not to cut yourself on the metal parts. Danger of in‐
jury. Wear protective gloves.

The dishwasher must be correctly aligned to ensure problem-free
operation.

In order to ensure stability, built-under and integrated dishwash‐
ers must only be installed under a continuous worktop which is se‐
cured to adjacent cabinetry.

If you want to convert your freestanding dishwasher to a built-un‐
der ("U") model, you will need to order the appropriate conversion
kit. If you remove the existing plinth, you must replace it with a U-
model plinth. This is necessary to avoid the risk of injury caused by
protruding metal parts.

The door springs must be adjusted equally on both sides. They
are correctly adjusted when the door remains stationary when left
half open (approx. 45° opening angle). It is also important that the
door cannot fall open.
The appliance may only be used with correctly adjusted door
springs.
14