Anti-Crease - Miele TDA 150 Operating Instructions Manual

Programmable functions

Anti-crease

Helps prevent creasing, if laundry is
not normally removed immediately
after the end of a programme. The
drum rotates at intervals for 2 hours
after the end of a programme.
The anti-crease function
– is activated ex-works. You can
shorten the duration of the anti-
crease phase or deactivate it if
wished.
– is active in all programmes, except
Woollens handcare.
– should always be switched on.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
 Press Start and keep it pressed in
whilst carrying out steps -.
 Switch the dryer on.
 Wait until the indicator light for the
Start button lights up constantly . . .
 . . . and then release the Start
button.
 Turn the programme selector to
Cottons Normal .
The Empty container indicator light will
flash three times.
50
The option selected will be displayed
by a number which will alternate with
.
 Anti-crease action off
 Anti-crease 1 h)
(The Clean out airways will also flash
once)
 Anti-crease 2 h (factory default
setting
(The Clean out airways will also flash
twice)
 Pressing the Start button switches
between the options.
 Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
 Carry out steps -.
 Switch the dryer off after checking.