Sort Programmes; Prog. Colour Allocation; Process Technology; Anti-Crease - Miele PDR 914 SOM Operating And Installation Instructions

en - Supervisor level

Sort programmes

Programmes can be moved within the programme list and in the Favourites list.
- Factory default: Off
- On
Moving programmes/favourites
You can move/change the order of the programmes (programme menu – single option list).
You can also move and change the order of the favourites that you edit in the Supervisor
level under Favourite programmes.
Touch the programme that you wish to move.

Press and hold the sensor until the frame changes.

Drag the programme to the required place.


Prog. colour allocation

You can assign a specific colour to a favourite programme. In the list of favourites, each
favourite programme is given a coloured frame, which can be adjusted.
- Factory default: Off
- On

Process technology

Anti-crease

At the end of the programme, the drum will continue to rotate at intervals if the laundry is
not removed immediately.
Changing this setting leads to increased energy consumption.
The setting  can be switched off or a time between 1 and 12 hours can be selected.
Factory default: Off

Drying levels

Changing this setting leads to increased energy consumption.
You can alter the drying levels for the
iron programmes.
Cottons
Drying levels
levels.
Factory default: normal
The residual moisture in drying level
to 26 % (damper).
Factory default: 20 %

Further cooling

Before the end of the programme, the temperature of the dried laundry is monitored and
the cooling phase at the end of the programme is extended if necessary.
106
Cottons
Minimum iron Automatic plus
, and
Machine iron
Minimum iron Automatic plus
, ,
can be set to one of 7 different
can be set in 11 levels from 16 % (dryer)
Machine
and