Other Benefits - Trane Voyager TC* User Manual

Trane Communication Interface
(TCI)
Available factory or field installed.
This module when applied with the
ReliaTel™ easily interfaces with
Trane's Integrated Comfort™ System.
*Refer to Model Number Description
for option availability.
Field Installed Options*
CO Sensing
2
The CO sensor has the ability to
2
monitor space occupancy levels
within the building by measuring the
parts per million of CO (Carbon
2
Dioxide) in the air. As the CO
increase, the outside air damper
modulates to meet the CO
ventilation requirements. The CO
sensor kit is available as a field
installed accessory.
Digital Display Zone Sensor
The Digital LCD (Liquid Crystal
Display) zone sensor has the look and
functionality of standard zone
sensors. This sensor should be
utilized with ReliaTel™ controls.
Dual Thermistor Remote Zone
Sensor
This sensor will reduce the total
number of remote sensors to obtain
space temperature averaging. This
sensor should be utilized with
ReliaTel controls.
High Altitude Kit
Previously a Canadian Agency
requirement for units applied about
2000 feet, it is not required by the
U.S. Domestic contractors should
consult with local authority on best
practice. Devates gas orifices by 10%.
High Static Drive
Available on many models, this high
static drive accessory extends the
capability of the standard motor.
Avoid expensive motors and
operating costs by installing this
optimized sheave accessory.
8
Features and Benefits
Humidity Sensor/Humidistat
Used in conjunction with our
Dehumidification (Hot Gas Reheat)
units to provide outstanding
humidity control and comfort.
Humidity sensors can be wall or duct
mounted and set for levels between
40% and 60%.
LP Conversion Kit
Provided for field conversion of gas/
electric units from Natural gas to
Propane.
Powered Exhaust Option
This option is available on downflow
units and provides exhaust of the
levels
2
return air, when using a downflow
economizer, to maintain proper
space
2
building pressurization. Great for
2
relieving most building
overpressurization problems.
Remote Potentiometer
When properly installed in the
economizer control circuitry, this
accessory provides a remote variable
resistance to enable the operator to
adjust the minimum damper
position.
Roof Curbs
Available for downflow units. Only
two roof curbs for the entire Voyager
line simplifies curb selection.
Static Drive Accessories
Available on many models, this high
and low static drive accessories
extend the capability of the standard
motor. Avoid expensive motors and
operating costs by installing this
optimized sheave accessory.
Ventilation Override Accessory
With the Ventilation Override
Accessory installed, the unit can be
set to transition to up to 3 different
pre-programmed sequences for
Smoke Purge, Pressurization, and
Exhaust. The transition occurs when
a binary input on the RTOM is closed
(shorted). This would typically be a
hard wired relay output from a
smoke detector or fire control panel.
The ventilation override kit is
available as a field installed
accessory.
Zone Sensors/Thermostats
Available in programmable,
automatic and manual styles.
*Refer to Model Number Description
for option availability.

Other Benefits

Airflow Distribution
Airflow is outstanding. The Voyager
can replace an older machine with
old ductwork and, in many cases,
improve the comfort through better
air distribution. The U-shaped airflow
allows for improved static
capabilities.
Cabinet Integrity
For added water integrity, Voyager
has a raised 1 1/8" lip around the
supply and return of the downflow
units to prevent water from blowing
into the ductwork.
Easy to Install, Service and
Maintain
Because today's owners are very
cost-conscious when it comes to
service and maintenance, the Trane
Voyager was designed with direct
input from service contractors. This
valuable information helped to
design a product that would get the
serviceman off the job quicker and
save the owner money. Voyager does
this by offering outstanding standard
features enhanced by a variety of
factory and field installed options,
multiple control options, rigorously
tested proven designs and superior
product and technical support.
ReliaTel™ Controls
ReliaTel controls provide unit control
for heating, cooling and ventilating
utilizing input from sensors that
measure outdoor and indoor
temperature.
RT-PRC024-EN