Table of Contents
Advertisement
Wire Stripping And Connecting Requirement
Guiding Outdoor Temperature Sensor Cable
1. Guide the outdoor temperature sensor cable inside the Tank Unit as illustrated below.
2. To avoid cable damaged by sharp edge, the cable must be guided through Bushing. The bushing must be used and must not
be removed.
3. The sensor must be located in the most suitable place, such as on a wall of house facing north-west or north to avoid
exposure to the morning sunlight. The reading of sensor might be affected by the heat radiated from direct sunlight.
4. The sensor must be placed at level of about 2/3 height of the wall.
5. Do not to place the sensor over the ventilation ducts, doors, windows or area where might be affected by other temperature
instead of outdoor temperature.
6. Avoid guiding of the cable through sharp edges and high temperature parts. Fail to do so might cause the cable damage.
20
Advertisement
Table of Contents
