Searching Using Various Functions; Changing Menu Options - Sony SLV-D350P Service Manual

QQ
3 7 63 1515 0

Searching using various functions

The VCR automatically marks the tape with
an index signal at the point where each
recording begins.
You can easily find a specific point using
various search functions.
To search using the index function (Scan and Play)
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
1
Insert an indexed tape into the VCR.
2
Press SEARCH.
3 Press b to scan ahead, or B to scan backwards.
The VCR searches and then plays back for about five
seconds.
Press H PLAY to view that program.
4
If you do not press H PLAY, the VCR automatically searches for the next index
mark, or until it reaches the end of the tape.
TE
L 13942296513
Adjusting the picture
(tracking)
Although the VCR automatically adjusts the tracking
when playing a tape, distortion may occur if the
recording is in poor condition. In this case, manually
adjust the tracking.
Press TRACKING +/– to display the tracking meter.
The distortion should disappear as you press one of
the two tracking buttons.
To resume automatic tracking adjustment, eject the
tape and reinsert it.
Note
• The auto tracking adjustment cannot be guaranteed to work with tapes recorded in the LP
mode on other VCRs.
www
.
http://www.xiaoyu163.com
SEARCH
H PLAY
V/v/B/b
Scan and play:
Press or
Go to
Press
End search:
Press
Scan and play
continued
101
Searching using various functions
Tracking
Tracking meter
x ao u163
y
i
103
Adjusting the picture (tracking)
http://www.xiaoyu163.com
2 9
8
To search for the counter 0:00:00 point
To mark a point on the tape that you want to find later, reset the tape counter to
"0:00:00."
The VCR automatically fast-forwards or rewinds to the 0:00:00 point on the tape
counter.
1
Press SEARCH.
2
Press V.
The VCR starts searching and automatically stops at
the 0:00:00 point.
To search for a blank portion of the tape
The VCR automatically searches for the beginning of a blank portion. You can easily
find a point you can start recording from.
1 Press SEARCH.
2
Press v.
The VCR starts searching and automatically stops at
the beginning of a blank space. If no blank space is
found, the VCR reaches the end.
Note
• Once in recording mode, if the VCR is put in pause and then released to start the recording,
no index mark will be inserted. An index mark will be inserted if the channel is changed
while VCR is put in pause.
Q Q
3 6 7 1 3
102
Searching using various functions

Changing menu options

You can change the tape length, auto play
and auto repeat settings. Normally the
default settings are used. Change these
settings if necessary.
1
Press SET UP when the DVD player is in stop
mode.
2
Press V/v to select
ENTER.
3
Press V/v to select the option to change.
.
104
Changing menu options
1-24
9 4 2 8
Go to
End search
1 5 0 5 8 2 9 9 4
SET UP
H PLAY
V/v/B/b
ENTER
OPTION SETUP
Language
Clock Set/Adjust
Channel Setup
Auto Power Off
RF Output Channel
V v
ENTER RETURN
(VIDEO) and press
VIDEO FUNCTION SETUP
Tape Length
Auto Play
Auto Repeat
V v B b RETURN
m
VIDEO FUNCTION SETUP
co
Tape Length
Auto Play
Auto Repeat
V v B b RETURN
9 9
2 8 9 9
:English
[ Off ]
[3CH]
SET UP
[ T120 ]
[ On ]
[ Off ]
SET UP
[ T120 ]
[ On ]
[ Off ]
SET UP