Table of Contents
Advertisement
Prepare the digital camera
Prepare the digital camera before loading it in the Case.
1. Battery Confirmation
It is impossible to change the batteries when using the Case. Make sure that you have sufficient
remaining battery capacity before use.
2. Check the remaining number of pictures
Check that the image storage medium has enough room for the number of pictures you want to take.
3. Remove the strap, lens cap, filter and eye-cup from the camera.
If the digital camera is loaded without removing these, the Case cannot be sealed properly and may leak.
4. After attaching the zoom gear to the lens, attach the lens to the camera.
5. Attach the antireflective ring to the lens.
EN
Lens
Antireflective ring
For details of the combination of the zoom gear and the antireflective ring, refer to P.22.
6. Press and hold down the u button to turn off the "EVF Auto Switch" setting.
Press the u button to switch the display between the finder and monitor.
When turned on, the eye sensor may activate and appear the finder display.
EN 10
Advertisement
Table of Contents
