Prepare The Digital Camera; Attach The Antirefl Ective Ring To The Digital Camera - Olympus PT-058 Instruction Manual

Prepare the digital camera

Prepare the digital camera before loading it in the Case.
1. Battery Confi rmation
It is impossible to change the batteries when using the Case. Make sure
that you have suffi cient remaining battery capacity before use.
2. Confi rmation of the Remaining Number of Pictures to be Taken
Confi rm that the image storage has a suffi cient remaining number of
pictures to be taken.
3. Remove the hand strap from the digital camera.
When a digital camera is loaded without removing the hand strap, the
hand strap may get caught between the Case lids and may cause water
leakage.
Attach the antirefl ective ring to the digital camera
Remove the lens ring while pressing the lens ring release button from the
digital camera, then attach the antirefl ective ring.
Change the digital camera setting when using the underwater wide
conversion lens (PTWC-01).
Press the OK button to display the live control, then select "PTWC-01"
under "Accessory Settings" with arrow pads or control dial. Then press
the OK button.
* Even if the setting has been changed, the four corners of the image may
be darkened when the zoom is used.
For details, see the instruction manual of the digital camera.
Lens ring release button
EN
EN 41