Table of Contents
Advertisement
11.4
Miscellaneous operating features and conditions
Table 21 lists various features and conditions. A "Y" in the support column indicates the feature or condition is supported. An
"N" in the support column indicates the feature or condition is not supported.
Table 21 Miscellaneous features
Supported
Feature or condition
Automatic contingent allegiance
N
Asynchronous event notification
N
Segmented caching
Y
Zero latency read
N
Queue tagging (up to 128 queue tags supported)
Y
Deferred error handling
Y
Parameter rounding (controlled by Round bit in MODE SELECT page 0)
Y
Reporting actual retry count in Extended Sense bytes 15, 16, and 17
N
Table 22 Miscellaneous status
Supported
Status
Good
Y
Check condition
Y
Condition met/good
Y
Busy
Y
Reservation conflict
Y
Task set full
Y
ACA active
N
ACA active, faulted initiator
N
Task Aborted
N
11.4.1 SAS physical interface
Figure 22 shows the location of the SAS device connector J1. Figures 23 and 24 provide the dimensions of the SAS
connector.
Details of the physical, electrical, and logical characteristics are provided within this section. The operational aspects of the
Seagate SAS drives are provided in the SAS Interface Manual.
Figure 22. Physical interface
Seagate 1200 SSD Product Manual, Rev. C
69
Advertisement
Table of Contents
