When Using Realshot Manager Advanced As A Remote Client; Installing Patch Files - Sony Ipela NSR Series Installation Manual

Caution
When you connect a USB device to the unit, the
[ERROR] lamp at the bottom right of the "Main" screen
may light. This indicates that the unit may not support
the USB device. For details see "Usage Precautions"
(page 3) or "An external device connected to a USB
connector does not work." (page 34) in the
"Troubleshooting" section.
When Using RealShot Manager
Advanced as a Remote Client
Perform the following to confirm operations.
1
Log on to RealShot Manager Advanced.
• Specify the server during logon. Specify the
central server value configured on the server for
the port.
The default value is "8082."
If the IP address of the server is "192.168.1.1,"
specify "192.168.1.1:8082" as shown below.
• Enter the user name and password configured in
the Server Configuration screen (page 27) for the
[User Name] and [Password].
2
In the main screen of RealShot Manager Advanced,
assign images to monitor frames from cameras
connected to the unit.
Two methods are available for assigning cameras.
• Drag and drop a camera connected to the unit
from the Cameras pane to a monitor frame.
• Click a monitor frame to select it, and then
double-click a camera from the Cameras pane.
3
Confirm that images from the camera selected in
step 2 appear in the monitor frame.
28

Installing Patch Files

Installing Patch Files
1
Copy the patch file onto a USB memory device or
CD/DVD.
Caution
Do not change the file name or other aspects of the
patch file.
2
Click [Patch Installation] in the Administration
Menu.
The Patch Installation screen appears.
3
Select the media on which the patch file is stored.
A list of patch file names appears.
4
Confirm a patch file name, and click [OK].
A confirmation message appears.
5
Confirm the content of the message, and click
[Yes].
Caution
The NSR will automatically reboot after
installation of certain patch files. A confirmation
screen will appear if reboot is necessary. If you
cannot stop your current operations, select [No] to
cancel installation, and perform installation when
rebooting the NSR will not be a problem.