TP-Link TL-WR743ND User Manual page 27

TL-WR743ND 150Mbps Wireless AP/Client Router
Figure 3-16 Quick Setup - Static IP
3. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-17.
Figure 3-17 Quick Setup – Wireless
Wireless Radio - Enable or disable the wireless radio choosing from the pull-down list.
Wireless Network Name (also called the SSID) - Enter a value of up to 32 characters.
The same name of SSID (Service Set Identification) must be assigned to all wireless
devices in your network. Considering your wireless network security, the default SSID is
set to be (XXXXXX indicates the last unique six numbers of each Router's MAC
address). This value is case-sensitive. For example, TEST is NOT the same as test.
Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the Router can be used. It may be illegal to use the wireless
function of the Router in a region other than one of those specified in this field. If your
- 20 -