Table of Contents
Advertisement
ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path
Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup
8 VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP. You
need to activate the VC to take effect. For PVCs management, you can use ATM QoS to
setup each PVC traffic line's priority.
•
Virtual Circuit: Select the VC number you want to setup, PVC0~PVC7.
•
Status: If you want to use a designed VC, you should activate it.
TD-8817B
ADSL2+ Modem Router User Guide
Figure 4-6
20
Advertisement
Table of Contents
