Advertisement
Preparation
1
Set your car's ignition switch to the ACC or ON position.
AC C
ON
2
Press [PWR] (Power).
The 12-hour system is used for the clock.
Clock Display at Power Off
1
Hold down [CLK] for more than 2 sec-
Press [DISP] to change the display.
onds. (The clock setting mode is activat-
ed.)
Display off
Hour blinks.
2
Adjust the hour.
Hour entered.
[[]: sets the hour ahead.
[]]: sets the hour back.
3
Press [CLK].
Minute blinks.
4
Adjust the minute.
Minute entered.
[[]: sets the minute ahead.
[]]: sets the minute back.
5
Press [CLK].
Completed
Notes:
¡
"ADJUST" is displayed when the clock is not adjust-
ed.
¡
Hold down []]
[[]
or
to change numbers rapidly.
General
[VOLUME]
[MUTE]
toggles mute on/off.
lights when mute is on.
[SQ] (Sound Quality)
selects a sound type (SQ).
Power On/Off
Set your car's ignition switch to the ACC or ON position.
Power on: Press [PWR].
Power off: Hold down [PWR] for more than 1
second.
Clock display
Source Selection
Press [SRC] to change the source.
Radio
AUX
Volume Adjustment
(Setting Range: 0 to 40, Default: 18)
Turn [VOLUME].
Mute
ON: Press [MUTE].
(
lights.)
OFF: Press [MUTE] again.
1
Please keep the microphone sound volume at an appropriate level.
2
Hold down the speaking button on the microphone to make an announcement. The sound of the
announcer is output from speakers.
Note:
¡
The sound of radio will become mute during making microphone announcement.
¡
The microphone sound output is not feasible during the mute function set to ON. This indicates there is nothing wrong with the
main unit.
3
Release the speaking button on the microphone to end an announcement.
Audio Settings
[VOLUME]
selects a value in the audio menu.
(PUSH SEL) (Push to Select)
selects items in the audio menu.
[SRC] (Source)
AUX
selects a source.
From line output of exter-
[PWR] (Power)
nal sound/audio device (ex.
toggles power on/off.
Silicon-audio player, HDD
player, etc.)
SQ (Sound Quality)
SQ is a function that can call up various sound types at
the touch of button in accordance with your listening
music type.
Press [SQ] to select the sound type as follows:
(FLAT) flat frequency response:
does not emphasize any part. (Default)
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(VOCAL) clear sound:
emphasizes middle tone and slightly
emphasizes treble.
Note: Settings of SQ, bass and treble are influenced one
another. If such an influence causes distortion to the
audio signal, readjust bass/treble or volume.
[DISP] (Display)
exits from the audio menu.
1
Press [
VOLUME
] (PUSH SEL) to display the audio menu display.
Note: If no operation takes place for more than 5 seconds in the audio menu (2 seconds in Main volume adjust-
ment), the display returns to the regular mode.
2
3
Press [
VOLUME
] (PUSH SEL) to select
Turn [
VOLUME
] clockwise or counter-
a mode to be adjusted.
clockwise to adjust.
Volume
(Setting Range: 0 to 40, Default: 18)
q :
Up
w :
Down
Bass
(Setting Range: –12 dB to +12 dB by 2 dB,
q :
Increased
w :
Default: 0 dB)
Decreased
Treble
(Setting Range: –12 dB to +12 dB by 2 dB,
q :
Increased
w :
Default: 0 dB)
Decreased
Balance
(Setting Range: 15 levels each, Default CNT (cen-
q :
Right enhanced
w :
ter))
Left enhanced
Fader
(Setting Range: 15 levels each, Default CNT (cen-
q :
Front enhanced
w :
ter))
Rear enhanced
Note: The FADER adjustment is not applicable to
this unit. (Please do not control FADER function)
Hide quick links:
Advertisement
