WARNING
•
BLIS does not function in sharp
curves.
•
BLIS does not function when your
vehicle is backing up.
Related information
•
BLIS* – introduction (p. 237)
•
BLIS* – operation (p. 239)
•
BLIS* – Cross Traffic Alert (CTA) (p. 240)
•
BLIS* – limitations (p. 241)
•
BLIS* – messages (p. 242)
Cross Traffic Alert
11
BLIS* – operation
Activating/deactivating BLIS
Button for activating/deactivating BLIS
11
BLIS and CTA
are activated when the
engine is started; this is confirmed when the
indicator lights on the front door panels flash
once.
BLIS can be deactivated/reactivated by
pressing the button on the center console.
The number or combinations of options on
the vehicle may not leave a space available
on the center console for the BLIS button. If
this is the case, BLIS can be deactivated/
reactivated in the MY CAR menu system, see
My Car – introduction (p. 76)
•
Select Off or On in
Settings
settings
BLIS.
07 Driver support
When BLIS is deactivated/reactivated, the
indicator lights will go out/illuminate (the indi-
cators will also flash once when the function
is reactivated) and a message will appear in
the instrument panel.
To erase the message:
•
Press the OK button on the left steering
wheel lever
or
•
Wait for approx. 5 seconds for the mes-
sage to disappear
Related information
•
BLIS* – introduction (p. 237)
•
BLIS* – function (p. 238)
•
BLIS* – Cross Traffic Alert (CTA) (p. 240)
•
BLIS* – limitations (p. 241)
•
BLIS* – messages (p. 242)
Car
*
Option/accessory, for more information, see Introduction.
07
239