Keyless Drive*- Locking/Unlocking - Volvo XC60 Owner's Manual

06 Locks and alarm
||
Inserting a new battery
CAUTION
When handling batteries, avoid touching
their contact surfaces as this could result
in poor battery function in the remote key.
Note the position of the battery's (+) or (–)
sides.
1. Use a screwdriver to pry out the old bat-
tery.
2. Insert a new one with the (+) side down-
ward.
Closing the remote key
1. Press the remote key's cover into place.
2. Hold the remote key with the slot for the
key blade up.
3. Carefully slide the key blade into its
groove.
06
4. Gently press the key blade in the groove
until it clicks into place.
*
156
Option/accessory, for more information, see Introduction.
NOTE
Volvo recommends that the batteries used
in the remote control meet the UN Manual
of Test and Criteria, Part III, sub-section
38.3.
Batteries mounted in the key from the fac-
tory and batteries exchanged by an
authorized Volvo workshop fulfill the above
criteria.
Old batteries should be disposed of prop-
erly at a recycling center or at your Volvo
retailer.
Related information
•
Remote key – functions (p. 151)
Keyless drive*– locking/unlocking
This system makes it possible to unlock and
lock the vehicle without having to press any
buttons on the remote key. It is only neces-
sary to have a keyless drive remote key in
your possession to operate the central locking
system.
Range of the keyless drive remote key–5 ft
(1.5 meters)
NOTE
•
The gear selector must in the P posi-
tion before the vehicle can be locked
and the alarm can be armed.
•
The buttons on the keyless drive
remote key can also be used to lock
and unlock the vehicle. For more infor-
mation, see Remote key and key blade
(p. 148).