HP ProLiant SL250s Gen8 User Manual page 27

Hide thumbs Also See for ProLiant SL250s Gen8:

Table of Contents

CAUTION:

Do not press down on the processor. Pressing down on the processor may cause

damage to the processor socket and the system board. Press only in the area indicated on the

processor retaining bracket.

Press and hold the processor retaining bracket in place, and then close each processor locking lever.

11.

Press only in the area indicated on the processor retaining bracket.

Remove the thermal interface protective cover from the heatsink.

12.

CAUTION:

Heatsink retaining screws should be tightened in diagonally opposite pairs (in an "X"

pattern).

Hardware options installation 27

Table of Contents