HP ProLiant SL250s Gen8 User Manual page 21

Connect peripheral devices to the server.
3.
Item Description
Hot-plug hard drive, Bay 1 HDD 1
1
Hot-plug hard drive, Bay 1 HDD 2
2
Option bay 1, PCI riser board
3
Hot-plug hard drive, Bay 1 HDD 3
4
Hot-plug hard drive, Bay 1 HDD 4
5
Option bay 1, FlexibleLOM riser
6
SUV port
7
Serial port
8
NIC 1 network port
9
NIC 2 network port
10
iLO 4 network port
11
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into RJ-45 connectors.
Connect the power cords to the power supplies.
4.
Connect the power cord to the AC power source.
5.
WARNING: To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety
•
feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Unplug the power cord from the power supply to disconnect power to the equipment.
•
• Do not route the power cord where it can be walked on or pinched by items placed against it.
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the server.
Setup 21