See Fig. - JVC KW-XC55 Service Manual

QQ
3 7 63 1515 0
3.1.6 Removing the CD mechanism assembly

(See Fig.9)

• Prior to performing the following procedures, remove the front
panel assembly, rear bracket, heat sink, top chassis assembly,
main board and CD mecha control board.
(1) Remove the three screws J attaching the CD mechanism
assembly to the top chassis assembly.
Reference:
• When attaching the CD mechanism assembly, joint the hole
of the CD mechanism assembly in boss d and boss e of the
top chassis assembly.
3.1.7 Removing the changer control board
(See Fig.10, 11)
• Prior to performing the following procedures, remove the front
panel assembly, rear bracket, heat sink, top chassis assembly
and bottom chassis assembly.
(1) From the back side of the bottom chassis assembly,
disconnect the card wire from the connector
changer control board. (See Fig.10)
(2) From the top side of the bottom chassis assembly, remove
the two screws K attaching the changer control board. (See
TE
Fig.11)
L 13942296513
Reference:
• When attaching the changer control board, joint the hole of
the changer control board in joints f of the bottom chassis
assembly.
3.1.8 Removing the mecha control board
(See Fig.12)
• Prior to performing the following procedures, remove the front
panel assembly, rear bracket, heat sink, bottom chassis
assembly and changer control board.
(1) From the back side of the bottom chassis assembly,
remove the screw L attaching the mecha control board,
and release the joints g from the bottom chassis assembly.
www
(2) Disconnect the wire from the connector
card wire from the connector
board.
.
Reference:
• When attaching the mecha control board, joint the hole of
the mecha control board in joints i of the bottom chassis
assembly.
http://www.xiaoyu163.com
CN972
CJ402
x ao u163
CN403 on the mecha control
y
i
http://www.xiaoyu163.com
2 9
8
CD mechanism assembly
J
Boss d
on the
Bottom chassis assembly
Q Q
3 6 7 1 3 1 5
Bottom chassis assembly
K
Changer control board
CJ402
L
and the
co
Top chassis assembly
.
9 4 2 8
Boss e
Top chassis assembly
J
Fig.9
Changer control board
CN972
Card wire
0 5 8 2 9 9 4 2 8
Fig.10
Cassette mechanism assembly
Joint f
Fig.11
CN403
Joint g
m
Mecha control board
Fig.12
9 9
J
9 9
K
(No.49784)1-7