Pentax Optio W10 Operating Manual page 61

4
Press the four-way controller (5).
A pull-down menu appears.
5
Choose a function and press the
4 button.
6
Repeat Steps 3 to 5 to register the
necessary functions.
7
Press the 3 button twice.
The camera returns to capture status with the current setting.
Using the Green Button
1
Press the Green button in A
mode.
The function assigned to [1] in [Green
Button] on the [u Setting] menu is called up.
2
Press the Green button again.
The function assigned to [2] is called up.
While the screen at right is displayed, use
the Green button to recall functions
allocated to [3] and [4].
3
Change the settings and press the
4 button.
The camera returns to capture status.
• If the Green Mode has been assigned to the Green button, the
camera enters the Green Mode one second after the Green button
is pressed (p.64).
• If a function other than the Green Mode has been assigned to the
Green button, the camera returns to the original screen if no
operation is performed for five seconds after the Green button is
pressed.
Green Button
1 Green Mode
2 Recorded Pixels
3 Quality Level
4 White Balance
Focusing Area
Focus Limiter
Cancel
MENU
Green Mode Green Mode Green Mode
EV Compensation EV Compensation EV Compensation
Next function assigned
to Green button
EV Compensation EV Compensation EV Compensation
Recorded Pixels Recorded Pixels Recorded Pixels
OK
OK
3
0.0 0.0 0.0
59