Using The Brightness Filter - Pentax Optio W10 Operating Manual

Using the Brightness Filter

This function lets you adjust the brightness of the selected image.
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to edit.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select q
(Brightness Filter).
4
Press the 4 button.
The brightness adjustment screen appears.
5
Use the four-way controller (45)
to adjust the brightness.
You can preview the results of the
brightness adjustment.
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
7
Use the four-way controller (23) to select [Overwrite]
or [Save as].
[Save as] is the only available option for protected images.
8
Press the 4 button.
The edited image is saved with the same number of recorded pixels
and quality level as the original.
Movies or images taken with another camera cannot be edited using
[Digital Filter] or [Brightness Filter]. An error message appears if you
choose this function from the Playback Mode Palette and press the
4 button.
MENU Cancel Cancel Cancel OK OK OK OK
6
137