Wall Mounting; Fitting The Wall Mounting Bracket; Installing The Wall Mounting Bracket; Installation Of Mounting Bracket On Brick/Concrete Wall - Viessmann Vitodens 200-W, Series B2HA 40 Installation Instructions Manual

Vitodens 200-W B2HA 45, 60 Installation

Wall Mounting

Fitting the wall mounting bracket

Following are the installation instructions for the mounting
bracket on each material. See the instructions applicable
to your installation requirements.

Installing the wall mounting bracket

The Vitodens 200-W B2HA can be wall-mounted on a
concrete wall.
Note: The enclosed screws and rawl plugs are only
suitable for concrete. For other construction
materials, use bolts and anchors that are suitable
for 155 lb (72 kg) loads.

Installation of mounting bracket on brick/concrete wall

1. Drill holes 7 / in. (12 mm).
31
64
2. Install rawl plugs and screw mounting bracket
to wall.
3. Ensure the mounting bracket is level.
CAUTION
Whichever mounting method is used, ensure that the
bracket is tightly and securely fastened to wall. Failure
to secure boiler properly could cause boiler to loosen,
posing a severe safety hazard.
Boiler Connections
13