Symbols On The Display; Extended Menu - Viessmann Vitodens 200-W B2HA series Operating Instructions Manual

Vitodens 200 Series 19 to 150 Operating
Menu
Standard menu (continued)
Press the following keys:
 for the required heating program
OK
to confirm
Note: For any other connected heating circuits, use the
settings in the extended menu.
Call up the standard menu as follows:
H If the screen saver is active (see page 12): Press any
key except .
?
H If you are somewhere in the menu: Keep pressing
until the standard menu appears.
Note: 2 minutes after any setting has been made, the
display automatically reverts to the standard
menu.

Symbols on the display

These symbols are not always displayed, but appear
subject to the system version and the operating state.
Heating programs:
Standby mode with frost protection monitoring
9
w Only DHW
w Heating and DHW
s Central heating with standard temperature
m Central heating with reduced temperature
M
Party mode enabled
N
Economy mode enabled
In conjunction with a solar thermal system:
Solar circuit pump running
A Burner in operation
Displays
HC1 (2, 3) To display the heating circuit selected
in the standard menu. To change this,
(see page 26).
e Frost protection monitoring
Messages
Service message

Fault message

Extended menu

In the extended menu, you can adjust and scan the
settings from the control unit's range of functions used
less frequently, e.g. time programs and holiday programs.
The menu overview can be found on page 36.
Call up the extended menu as follows:
H If the screen saver is active: Press any key except
and then press .
H If you are somewhere in the menu: Press
Controls
?
.
11