Emissions Test Mode - Viessmann Vitodens 200-W B2HA series Operating Instructions Manual

Emissions
Vitodens 200 Series 19 to 150 Operating

Emissions Test Mode

Emissions test mode should only be activated by your
flue gas inspector during the annual inspection.
Extended menu:
1.
2. "Test mode"
3. "Flue gas test ON"
If the burner is on, the symbol is shown.
Note: You can also enable emissions test mode if the
controls are locked out by your heating contractor.
Ending emissions test mode
H Automatically after 30 min.
OK
H Press .
31