Bernina 700D Owner's Workbook page 67

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Attach the 2-thread adapter to the upper looper. Note: This is an optional accessory for the 700D.
• Following the instructions in the Owner's manual thread the serger for a 2-thread flatlock stitch. Set
tension levers as directed.
• Pull the rolled hem lever towards you.
• Adjust the stitch length to 1.75mm.
• Set cutting width at 2mm (normal).
• Place the fabric under the presser foot and serge along one 6" edge, trimming about
raw edge.
• Return stitch length and thread tension levers to normal.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
TWO THREAD ROLLED HEM
Fabric:
Needle:
Thread:
Presser Foot:
1/04/02
®
BERNINA
Batiste, 3" x 6"
70/10 Sharp or Microtex
2 cones of lightweight serger thread
Standard
®
700D/800DL
1 / " from the
8
700D/800DL/67