Bernina 700D Owner's Workbook page 64

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Attach the 2-thread adapter to the upper looper. Note: This is an optional accessory for the 700D.
• Set all thread tension levers between 3-5 (normal).
• Following the instructions in the Owner's manual thread the serger for a 2-thread flatlock stitch using
Jeans Stitch ® in the lower looper. Set tension levers as directed.
• Adjust the stitch length to 2.5mm.
• Fold the fabric in half to 2" x 6" and position it halfway between the left needle and the stitch finger.
Optional: Attach the Attachment Base and the Right Seam Guide. Move the Right Seam Guide
halfway between the needle and the stitch finger.
• Slowly serge the fabric. The looper threads will extend beyond the fabric on the right side of fold.
• Gently pull the fabric flat
• Return stitch length and thread tension levers to normal.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
TWO THREAD FLATLOCK STITCH
Fabric:
Needle:
Thread:
Presser Foot:
1/04/02
®
BERNINA
Medium weight cotton, 4" x 6"
80/12 Stretch
1 cone of serger thread
1 cone of Jeans Stitch
Standard
®
700D/800DL
®
700D/800DL/64