Bernina 700D Owner's Workbook page 13

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Thread the serger for a four thread overlock stitch.
• Fine tune the tensions for a balanced overlock stitch (3-5).
• Adjust the stitch length to 2.5mm.
• With differential set at N, serge on one 6" edge. If fabric is lightweight enough you will have
a puckered edge.
• Adjust the differential to 0.7.
• Serge along the other edge, trimming slightly. With a low differential setting, the puckered
edge should be eliminated.
• Mark the differential settings on the fabric sample.
BERNINA
M Y
ASTERING OUR
DIFFERENTIAL FEED
Fabrics That Pucker
Fabric:
Needle:
Thread:
Presser Foot:
1/04/02
®
BERNINA
Batiste, 3" x 6"
80/12 Universal
4 cones of serger thread
Standard
®
700D/800DL
N
0.7
700D/800DL/13