Table of Contents
Advertisement
3. Lay the VSK-1000 on its side, and hold the drive in place on top of the grommets.
4. Secure the device to the case with the screws provided, tightening the screws with your fingers first,
and then the screwdriver.
5. Connect the appropriate power and data cables to your device
C
M
2.8
ABLE
ANAGEMENT
There is a cable management compartment behind the 3.5" drive
cage. You can tuck or route excess cables in this compartment.
1.
Remove the right enclosure panel.
2.
Locate the cable management compartment with cable ties
located behind the walls of the 3.5" drive cage.
3.
Tuck or route your excess cables to the compartment. This
will keep the cables from interfering with airflow in your
case and help with cooling.
4.
Use the cable ties provided to hold them in place.
10
Advertisement
Table of Contents
