Cable Management - Antec P280 User Manual

2.8

Cable Management

There is a cable management compartment between the motherboard and right side panel, as well as
cable tiedowns located on the back of the motherboard panel. You can tuck excess cables in this
compartment or route them to the drive bays.
Choose the cables you would like to
pass through the holes behind the
motherboard tray. Pull them through
the hole toward the right side of the
case.
Use the zip ties provided to hold your
cables in place. Zip ties can be anchored
to tiedown locations located on the
back of the motherboard panel.
For cables which will be routed back to
front drives or other internal
accessories, feed the cables back
through the insertion point nearest the
Use the grommet-lined cable routing holes to route PSU cables. The
yellow circle shows a cable tiedown.
destination of the cable. Connect the
cable and then pull the slack back to the
right side of the case.
For cables which will be routed directly to front drives or other internal accessories, cable tiedowns are
located along the drive cage. Bundle front drives' or other internal accessories' cables together and
secure them using tiedowns.
16