Table of Contents
Advertisement
2.5
Cable Management
There is a cable management compartment between the
motherboard and right side panel, as well as cable tiedowns
located on the back of the motherboard panel. You can tuck
excess cables in this compartment or route them to the drive
bays.
Choose the cables you would like to pass through the holes
behind the motherboard tray. Pull them through the hole
toward the right side of the case.
Use the zip ties provided to hold your cables in place. Zip ties
can be anchored to tiedown locations located on the back
Use the grommet-lined cable routing holes to route PSU cables.
of the motherboard panel.
The yellow circle shows a cable tiedown.
For cables which will be routed back to front drives or other internal accessories, feed the cables back
through the insertion point nearest the destination of the cable. Connect the cable and then pull the
slack back to the right side of the case.
For cables which will be routed directly to front drives or other internal accessories, cable tiedowns are
located along the drive cage. Bundle front drives' or other internal accessories' cables together and
secure them using tiedowns.
15
Advertisement
Table of Contents
