Sony SLV-L45AR Service Manual page 66

No. Problem
Front unloading cannot be performed • The cassette drive mechanism is
when ejecting the cassette.
(Front loading can be performed.)
06
Front loading and front unloading
cannot be performed when ejecting
the cassette.
07
The mechanism becomes 1(REVIEW) • The mechanism mode switch
while moving from 2 (IDLER),
08
3 (STILL), 4 (BRAKE), and to
5 (STOP).
The mechanism becomes 7 (INITIAL)
while moving from 1 (REVIEW),
09
2 (IDLER), 3(STILL), 4 (BRAKE),
and to 5 (STOP).
The capstan motor does not rotate
10 and cassette tape eject when
cassette tape insert.
The cylinder motor does not rotate
11 and cassette tape eject when
cassette tape insert.
Note:
For details of mechanism operations corresponding to the mechanism positions of the self-diagnosis numbers 08
and 09 above, refer to the separate volume on the V95
These manual reference numbers are shown in the cover.
Mechanism Mode Display Contents
Mode No. Mechanism Mode
00 CASSETTE OUT
01 STANDBY
02 STOP
03 STILL
04 REC-PAUSE
05 AUDIO DUBBING – PAUSE
06 FRAME ADVANCE
07 SLOW
Main Possible Cause
faulty .
• The front door is caught.
• The tape cassette is caught in the
cassette drive mechanism.
• The main cam and front rack gear of
the front loading mechanism have
not engaged properly.
• The gears of the front loading drive
mechanism have not engaged
properly.
contact is faulty.
• The mechanism mode switch
contact is faulty.
• The capstan motor is faulty.
• The control of the capstan motor is
faulty.
• The cylinder motor is faulty.
• The control of the cylinder motor is
faulty.
Ι
mechanism manual.
Mode No. Mechanism Mode
08 PLAY
09 REC
10 AUDIO DUBBING
11 X2 SPEED PLAY
12 CUE
13 REVIEW
14 FAST FORWARD
15 REWIND
6-3
Mechanism Operations and
State After Occurrence
Front loads and shifts to the STOP or
INITIAL mode.
• When the power switch is turned on
before eject operations: Shifts to the
STOP mode.
• When the power switch is turned off
before eject operations: Shifts to the
INITIAL mode and the power goes
off.
The power is forcibly turned off with
the mechanism at its current position.
The power is forcibly turned off with
the mechanism at its current position.
Carries out tape take-up operations,
shifts to the INITIAL mode,
and the power goes off.
Shifts to the STANDBY mode.
Protect cassette tape.
Shifts to the STANDBY mode.
Protect cassette tape.
Mode No. Mechanism Mode
16 VIDEO INSERT
17 VIDEO INSERT – PAUSE
18 AUDIO/VIDEO INSERT
19 REVERSE X2 SPEED PLAY
99 OTHERS