Position; Displaying The Position Screen - Kenwood DDX8017 Instruction Manual

Position

You can adjust the sound effects according to your listening position.

Displaying the Position screen

Position
Position screen
MENU
3
1
2
96
|
English
5
Adjust
Front R
4 4
6
P1 P2 P3
Position
1 Returns to the Control screen of the previous
source.
2 Calls the Setup Menu. (page 60)
3 Calls the Sound Effects Menu.
4 Sets a listening position.
You can select any of "Front R" (Right front), "Front
L" (Left front), "Front All" (All front), and "All" (All)
positions.
5 Displays the Position Fine Control screen.
(page 97)
6 Stores the present adjustment setup in memory, or
calls it from memory. (page 97)
• The final distance is adjusted to the total of Car Type Set
Up value (page 62) and Position Setup (both Position and
Position Fine Control) value.
• If you change the Car Type Set Up value (page 62), the
position is set to "All".
• Only the adjusted distance of position setup (Position and
Position Fine Control values) is stored in memory. Therefore,
the final adjustment distance changes if you change the Car
Type Set Up value (page 62).