Direct Search; Traffic Information - Kenwood DDX8017 Instruction Manual

Direct Search

Tunes in a station when its frequency is entered.
1
Select a band
–
BAND
2
Select the Direct Search mode
# BS
DIRECT
3
Enter frequency
—
0
When you enter frequency, signal reception starts.
Example: When you receive FM 92.1 MHz
0 9 WXYZ
Example: When you receive AM 810 kHz
0 8 TUV 1 . ? &
• The operation ends automatically if you do not operate
within 10 seconds.
34
|
English
+
9 WXYZ
2 ABC 1 . ? &
0

Traffic Information

When a traffic bulletin starts, any source is switched
to the traffic information and it is displayed
automatically.
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
Traffic Information screen
MENU MENU
3
TI
1
2
Traffic Information
1 Calls the Sound Effects Menu. (page 88)
2 Calls the Setup Menu. (page 60)
3 Turns the Traffic Information function on or off.
If you continue to listen to the audio source
during traffic bulletin...
• It is necessary to have Traffic Information function set
to On in order to have the Traffic Information screen
appear automatically.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it's automatically
the remembered volume.
TUNER