Timer Operation - Kenwood CD-4260M Instruction Manual

Timer operation

As this unit incorporate the timer standby function, play-
back can be started at desired moment if a commercially
26
available audio timer is combined with this unit.
Preparation
÷ Close the disc door.
÷ Connect the system components so that
their power can be switched on by the timer.
÷ Read the instruction manual of the timer
carefully.
1
Set the power switches of the system compo-
nents to the ON positions.
2
Select the disc to be played.
1 Select the disc number.
Previous disc
Within 8 seconds!
2 Play the disc.
3
Set the listening volume.
1 Adjust the volume on the amplifier or receiver.
2 Stop playback.
4
Set the timer for the desired ON time.
5
Set the TIMER PLAY switch to ON.
TIMER PLAY
OFF
DISC SKIP
DOWN UP
Next disc
ENTER
6
Main unit
ON
Audio timer
Receiver or amplifier
*
This unit
÷ The disc number can be selected directly by using the DISC SELECTOR
button and numeric buttons in place of the DISC SKIP(DOWN/UP)
buttons.
÷ Read the instruction manual of the timer carefully.
÷ When the set time comes, playback will start automatically.
÷ The playback mode will be TRACK mode.
Programming tracks in desired order (PGM mode)
12:00
Audio cable
o PUSH OPEN
)
To AC outlet