Connecting To Other Devices - Kenwood CD-4260M Instruction Manual

Multiple compact disc player
Hide thumbs Also See for CD-4260M:
Table of Contents

Advertisement

Connecting to Other Devices

Make connections as shown below.
When connecting the related system components, refer also to the instruction manuals of the related components.
6
Do not plug in the power lead until all connections are completed.
OUTPUT
R
L
DIGITAL OUT
OPTICAL
T E X T
SYSTEM
CONTROL
S L 1 6
T E X T
*1
Connect a PC to use the
PC LINK function.
Audio cable
* 1
Note on the SL16 TEXT jack
When using a KENWOOD Receiver equipped with the SL16 TEXT
jack, connect it to the Receiver using the communication cable
provided with this unit. This makes it possible to display the
disc and track titles on the LCD remote control unit (provided
with the Receiver).
If your receiver has the SL16/XS8 mode select switch,
set the connected receiver to the [SL16] mode.
Note
Note
1. Connect all cables firmly. If connections are loose, there could be loss of sound or noise produced.
Notes
Notes
Notes
2. When plugging and unplugging connection cables, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cables without removal of the power cable can cause malfunctions or damage to the unit.
DIGITAL OUT jack (OPTICAL)
Remove the protective cap before using the DIGITAL OUT jack.
DIGITAL OUT
OPTICAL
T E X T
Remove the cap
RS 232C
D-Sub 9 pin connector
RS-232C cable "Reverse type"
(Commercially-avaliable)
CD
System
control
cable
SYSTEM
TEXT
CONTROL
Receiver or Amplifier, etc.
DTS Disclaimer clause
When playing DTS-encoded CDs, excessive noise will be ex-
hibited from the analog stereo outputs. To avoid possible
damage to the audio system, the consumer should take proper
precautions when the analog stereo outputs of the CD player
is connected to an amplification system. To enjoy DTS Digital
Surround™ playback, an external 5.1 channel DTS Digital Sur-
round™ decoder system must be connected to the digital out-
put (S/P DIF, AES/EBU, or TosLink) of the CD player.
Connecting to Other Devices
Digital component (MD,DAT, etc.)
DIGITAL INPUT (OPTICAL)
Optical digital cable
(Commercially-avaliable)
To wall AC
outlet
Commu-
Optical digital cable
nication
(Commercially-avaliable)
cable
OPTICAL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dpf-j6030Cd-425mCd-4700mCd-425

Table of Contents