Operation Outline; Connections And Setup; Operating Notes - Kenwood DP-J1070 Instruction Manual

DP-J1070/J695 [En]
i
When this unitis connected with KENWOOD CD player(s) using
3¢
mini-plug cord(s) (optional), relay playback or relay random
#@
playback between more than one CD player is possible. {With
#<4 connection system B, only relay playback is possible.)
Note that, with this operation, the connection
system
configuration and operation method is variable depending on
the equipment connected.
System A
Operation outline
e Relay playback (or relay random playback is possible between sets A, Band C. When the power of set B
or Cis off (STANDBY mode), relay playback
is possible between sets A and C or between sets A and B. —
e Even when the power of set A is off (STANDBY mode), the playback of set B or C can be reproduced
if the power of set B or Cis ON. But relay
playback is not possible in this case.
See eat act Te taAnMA EAM teatitainenen anes Td waa ooh
Connections and set-up
KENWOOD amp or receiver
DP-J1070
ST ITED.
=
O=6
DP-J695
p20 OO
2s
pp-J2070 ==
DP-R6070
Mini-plug cord
(optional)
Mini-plug cord
(optional)
REMOTE
cONTAcL «6G
MODE
remote = E:
CONTACL «=o
MODE it
Set theremote control
mode according to the
connection configura-
tion.
Lit Set to the same position as
the player to be controlled.
Operating notes
¢ Before starting playback, set the input selector of the ampiifier or receiver to CD.
e With each pair of set and remote control unit, set the remote control mode switches on the rear panel and remote
control unit to the same positions 4
according to the system configuration. If each pair of switches are not in the same position,
relay playback and remote control operations will not |
be possible.
i
ae A tal a CERT
gNotesy simultaneously.
3, If the power of set A is turned off during playback of set B or C, the set being played
stops playback.
4. The DP-R6070 can be remote controlled using the remote contro! unit provided with this unit. In
this case, set the remote control mode switch
of the remote control unit to the same position as the REMOTE CONTROL MODE switch on the
rear panel of the DP-R6070.