DUCT BLOCK ASSEMBLY
Wired Dress 3P
Ballast Power to
hooks on Duct Block
as shown to the right.
Ensure 9P ballast
Connector is wire
dressed as shown to
the right
KDF-37H1000
Install Duct Block Assy to Rear Cabinet and Route 3P Ballast power
Connector as shown to Holder Wire on Rear Cabinet
Connect 9P Ballast/2P thermal sensor/3P [T] and 3P Duct Blk Fan
Connector and dress to wire holders as shown. Do Not close
Completely wire holders.
KDF-37H1000
28