Advertisement
Neede
*TE X 1 (#11 & 14) or DB X 1
(49,
411
414) can be used with this machine.
TE X 1 (#1 1) is mounted on the machine.
To remove the
needle
(1)
Turn the pulley clockwise by
hand until the needle is raised
to the highest position.
(2) Loosen the needle set screw
with the screwdriver (turn left)
and remove the needle.
NOTE:
When removing the needle, hold
the needle with the tweezers to
avoid dropping it.
To fit the needle
(1) Turn the pulley until the needle
bar is raised to the highest
position.
(2) Hold the needle with its long
grooved side to the front
and
insert
it
as far as the needle
stop.
(3) Tighten the needle set screw
securely, taking care that the
needle is set in the correct
position.
Needle set screw
bar
Needle
stopper
Needle
set
Long groove
toward you
Advertisement
