Advertisement
WIRING INSTRUCTION
Only for the British rnarketl
When changing plug wiring
should be effected according
to the instruction below.
Check the voltage
ittlore
connecting the sewing machine to an electrical supply ensure that the
voltage marked on the rating label of the machine is the correct voltage for your
electrical supply. if it is not, do not use the machine but refer back to your
dealer.
Connecting to your Electricity supply
I he sewing machine has a flexible two core mains lead permanently connected
lii
the
loot control. At the free end of the lead a suitable plug should be fitted.
Important
ti
wires in the mains lead of this appliance are coloured in accordance with the
Ii lh>wing
code:
BLUE:
NEUTRAL
BROWN: LIVE
As the
colours of the wires in the mains lead of this appliance may not corres
,nd
with the coloured markings identifying the terminals in your plug, proceed
I nIh iws:
lie wire which is coloured blue must be connected to the terminal which is
iii.it
Led
with the letter N or coloured black. The wire which is coloured brown
lOll
he
connected to the terminal which is marked with the letter L or coloured
using
a 3pin
plug do not make any connection to the terminal marked with
lhe letter L
or by the earth symbol
or coloured green or green and yellow.
Your
I lnsqvarna sewing machine is double insulated and no earth connection is
II
I
.
ittip Fused plug is used, it should be fitted with a 3 amp fuse. It is in your
wit
inittesi
to
ensure that the plug is correctly fitted to the mains lead. If in
liitht
cottsult a qualified electrician, as Husqvarna Limited cannot regard the
Cpu!
d littl
Is on the
plug connection as a service that can be given free of
lii
0
under the lerms ol
the
guarantee.
is
lpIiIiri e conIorns with the requirements
ot E.E.C. directive No. 76/889
itlillIli' to
.idio inlertetence.
Advertisement
