Advertisement
f the cutting width
is
wider than the bight size
*ln
this
case,
the
cloth will be rolled.
Loosen the set screw
•
for the stitch tongue
and
move
stitch
tongue
to
right.
•
Then,
adjust
the
bight size and the
cutting
width.
Or
loosen the screw for
lower knife holder
and move the hold
er to left.
*
The pressure of the presser foot
can be adjusted by turning the
pressure adjusting screw. Since
this machine has already been
adjusted to a pressure suitable
to light and medium-Fabrics, no
further adjustment is necessary
except when you are sewing very
heavy or very light materials.
Usually, when sewing very light
materials, the presser foot pres
sure should be slack and when
sewing very heavy materials, it
should be tight.
Presser foot pressure
—
22
-
Advertisement
